More about SWF Krantechnik at www.swfkrantechnik.com

BLACKLINE
Wire Rope Hoists & CraneKit

Sometimes performance only comes up if you are focused on the basics. This is exactly the idea which is behind the BLACKLINE by SWF Krantechnik.

A vast number of established and top-rated components arisen from the own engineering design with outstanding technologies are assigned for power and a long life. All components and products made from this meet the European safety standards. Furthermore, you can trust the experience and know-how of a worldwide operating company in a German tradition.

The BLACKLINE by SWF Krantechnik sets its priorities on a high quality and attractive cost effectiveness. Reliable power and an elaborate technology make the BLACKLINE unique for all who want to avoid bigger investments in a high-quality crane.


Wire Rope Hoist
Features


Standard equipment:
  • 2­speed hoisting motors (6/1)
  • hoisting limit switch with slow­down function
  • Mechanical overload protection
  • Thermal protection for hoisting and travelling motors
  • Travelling machinery, 2­step
  • 48 V contactor control
  • Robust rope guide made of cast iron

  • Wire rope drive

    Benefits:

    • Low lateral hook movement
    • Improved use of space
    • Less wear on the wire rope drive

    Thanks to its large drum diameter, it not only uses the space better but also optimises wear in the wire rope drive and minimises lateral hook movement. This means that loads can be reliably transported with extreme precision and placed with ultimate accuracy, thanks to the minimal diagonal pull.



  • Lifting limit switch

    Benefits:

    • No mechanical actuation by the hook block
    • Protected installation in the casing
    • No loss of build height

    The lifting limit switch is well protected against external influences and is located inside the casing. Its reliability and security of function is excellent as it has no mechanical actuators or wear parts. Four fully selectable switching points ensure an automatic switchover from "fast" to "slow" in the top position, for instance.



  • Gearbox

    Benefits:

    • Large bandwidth of speeds
    • Quiet and vibration-free
    • Long service life

    The lightweight yet compact gearbox offers a number of ratios and hence a wide range of speeds. Quiet and vibration-free running is achieved by using ground, helical gears. The gearbox is manufactured in our own, rigorously monitored production facility and is lubricated for its long service life.



  • Hoist motor

    Benefits:

    • Slow speed for precise working
    • High speed for high productivity
    • Low maintenance and wear, longer motor service life

    The hoist motor actually combines two motors with a power ratio of 6:1 in one cylinder and thus ensures not only safe and productive working under full load, but also ensures precise load handling at low speeds. The minimal wear and service requirement also ensures economical operation of the pole-switched motor.



  • Overload protection

    Benefits:

    • Solid and reliable mechanical overload protection
    • Protects crane and building structure
    • Enhanced safety

    The mechanical overload protection protects crane and building structure from damages.



  • Space utilisation

    Benefits:

    • Optimal space utilisation
    • Compact dimensions and optimum approach dimensions
    • Minimal hook dimensions

    The large diameter of the rope drum and the compact arrangement of the control elements allow the best practicable approach dimensions and ideal utilisation of the space. The minimal lateral hook movement also reduces the pendulum motion of the load.



  • Contactor control

    Benefits:

    • Proven control of hoist and trolley travel motor
    • Two speeds for precise and fast load handling
    • High reliability and safety

    Hoisting and lowering movements are reliable and safe due to the solid contactor control. The load can be moved with two speeds – slow and precise or fast and economically.




Downloads
Brochures

BLACKLINE electric wire rope hoists
and CraneKit

File size: 3.5MB

› Download

Wire Rope Hoist
Types

NOVA BLACKLINE

  • Single girder trolley
  • up to 12.5 t
  • low headroom

NOVA BLACKLINE M

  • Double girder trolley
  • up to 20 t
  • Rail gauge 1200 - 2400 mm

MODEL SIZE GENERATOR

Enter the maximum hoist load and height you require to determine the size of your NOVA BLACKLINE:

Load [t]


Lifting height [m]


Type (optional)



CraneKit
Features


Options:
  • Hook operated limit switch
  • Visual and acoustic alarm in case of overload
  • Trolley limit switch, 2-step
  • Anti-Collision device for crane bridge
  • Crane horn
  • Warning light (radio remote control active)
  • Rechargeable batteries with battery charger for the radio remote control
  • Storage cabinet for transmitter
  • Radio remote control RadioMaster3
  • Back-up pendant, tethered at the control panel
  • Buffer extensions for crane end carriages
  • Anti-jump catches for crane end carriages
  • Mechanical time counter



  • The crane control panel is installed sideways at the end carriages, which doesn't effect to the low headroom of the crane. The optimized electrical concept allows a timesaving and easy installation of all electrical components. The radio remote receiver can be fixed by powerful magnets at the outer crane control panel.



  • Available for profile or box girder solutions with spans up to 28 m.



  • The reliable trolley power supply is realized by a modern and contemporary energy chain. The cables are well protected and more wear resistant compared to conventional flat cable solutions.











  • Thanks to the radio remote control, a save and wireless operation of crane and load is not rocket science. The safety of the crane operator gets enhanced due to the flexible positioning.




Options:
  • Hook operated limit switch
  • Visual and acoustic alarm in case of overload
  • Trolley limit switch, 2-step
  • Anti-Collision device for crane bridge
  • Crane horn
  • Warning light (radio remote control active)
  • Rechargeable batteries with battery charger for the radio remote control
  • Storage cabinet for transmitter
  • Radio remote control RadioMaster3
  • Control pendant, tethered at the hoist trolley
  • Back-up pendant, tethered at the control panel
  • Buffer extensions for crane end carriages
  • Anti-jump catches for crane end carriages
  • Anti-jump catches for double girder trolley
  • Mechanical time counter




















CraneKit
Highlights


Easy configuration and assembly


Less working steps and optimized electrical concept

The assembly work for the CraneKit BLACKLINE is minimized by a reduced number of necessary working steps. Therefor the electrical concept is optimized and prewired. A reduced number of needed components completes the time saving assembly process and makes moreover the maintenance work easier.

The narrow configuration frame allows a quick assembly and a highest possible compatibility of all components. The result is a safe, economical and reliable crane solution.


Control panel with radio remote receiver


Optimized electrical concept, prewired with plugs

The prewired and pluggable electrical connections contribute to a quick first operation and easy maintenance. The control panel is installed sideways at the end carriage. Due to the compact measurements, the headroom of the crane is not affected by this construction.
The receiver of the radio remote control can be fixed by powerful magnets at the outer control panel.


Contemporary energy chain


Reliable and low-wear energy chain protects from mechanical damages

The BLACKLINE offers a power supply by means of a modern and contemporary energy chain. Therefore a long-life protection and a perfect cable routing is secured. A minimized number of screws and components allow a quick assembly.

Directly compared with the classical flat cable the robust power supply diminishes the attrition and offers also an ideal protection against mechanic damage. While driving the crane one doesn’t have to take into account suspended cable loops.


CraneKit crane components


Approved and well-matched components

All components are perfectly machted and provid e a first class and safe interaction. Due to the sophisticated standards of SWF all components guarantee high quality levels in fitting accuracy and material. Quality from a single source.


Radio Remote Control
Teleradio





The radio remote control TeleRadio offers the possibility to drive loads from a safe distance. The safety of the crane operator ranks first. You get the BLACKLINE with two transmitters, which belong to the standard equipment. Thereby the BLACKLINE is perfectly forearmed for a reliable and permanent control of loads.

The European manufactured steering is enabled by a set of standard batteries with a functional duration up to 100 hours. Optionally, you can also get rechargeable batteries and a corresponding battery charger.

The receiver can be fixed at the crane control panel by powerful magnets easily. In addition to that, pluggable electric connections provide a quick and relieved operation.



Radio Remote Control
Teleradio

  • High Safety
    Driving loads from a distance raises the safety of the crane operator
  • Extensive scope of delivery
    Serial equipment with two transmitters and a receiver
  • Optimal power supply
    Standard batteries (3x1.5 V AAA / LR03) with a functional duration of up to 100 hours
    (optional rechargeable batteries)


BLACKLINE
References

TOP

This website uses cookies to ensure you get the best user experience. Learn More

OK